The Electric Wrist Rotator provides electrical rotation that can be operated with all ottbock System Electric Hands that are equipped with the Quick Disconnect Wrist.Required for pronation and supination of the handIf muscular tension is not sufficient for operation with the 13E205 MyoRotonic, the 10S17 can be controlled by the 9X14 Harness Pull Switch, the 9X18 Traction Switch, or the 9X25 Rocker SwitchIncludes:11S4 Lock Ring11S61 Wrist Drive with Coaxial Plug11S25 Lock Ring9E85 Protective Cap9E363 Drive Unit9E365 Protection Plug

The MyoEnergy Integral 757B35=* is an integrated power supply system made up of several components. The charging receptacle enables battery contact, indicates the current charge status and serves to switch the prosthesis on and off and release it in an emergency. The communication cable with a 3-pin receptacle is used for the exchange of data. The supply cable establishes the connection between the battery and the respective prosthesis component. The battery consists of two cells with different capacities.Includes:Battery Lamination DummyCharging Receptacle Lamination DummyDrilling Template for Charging ReceptacleCharger must be ordered separately - 757L35 MyoCharge Integral

The System Electric Hand DMC Plus is suitable for all amputation levels except wrist disarticulation. It features a DMC and DMC plus control mode. The desired control mode is selected with the integrated 13E185 Function Plug. In DMC plus control mode, after gripping once with maximum grip force, a higher signal is required to open the hand. This reduces the risk of opening the hand with undesired muscle signals. In this system, two independent measurement and control systems proportionally control gripping speed as well as gripping force. Gripping speed and gripping force are determined by the strength of the muscle signal. It is designed for those who don’t utilize the AutoGrasp function. It features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackSpecifically designed for adolescents or women with small handsDynamic Mode Control (DMC) plus control system offers additional security for user and is engaged by removing a function plugThree power supply alternatives accommodate variable residual limb shapesPassive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction RingThe electrodes must be adjusted with the 757M11 MyoBoy

The System Electric Hand Digital Twin with Quick Disconnect Wrist is suitable for all amputation levels, except wrist disarticulation. The Digital Twin control features a digital and dual channel control mode. The desired control mode is selected with the integrated 13E185 function plug. The hand features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. With potentiometer for adjusting the switching threshold (double-channel control). An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackProvides passive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction Ring)

bebionic Hand with Short Wrist

By ottobock

This page is for the bebionic hand with short wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) The bebionic Short Wrist consists of a low-profile connector for patients with a long residual limb. A short wrist lamination ring is also supplied with these hands. With this wrist option, the patient still maintains a high degree of freedom since the hand rotates against constant yet adjustable friction. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position PDAC Approved

bebionic Hand with Flexion Wrist

By ottobock

This page is for the bebionic hand with flexion wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) PDAC Approved The flexion wrist allows the patient to position the hand in five locking levels of flexion and extension from -40° to +40° in 20° increments. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position