Universal power supply for powering:Microprocessor knees:X3: 3B5Genium: 3B1C-Leg: 3C88 & 3C98Kenevo: 3C60MyoBock chargers:757L35757L20757L14757L13C-Brace 217KO1: C-Brace

The MyoRotronic is compatible with all ottobock Myobock System Electric Hands and System Electric Greifers with Quick-Disconnect Wrist and enables proportional or digital control of the 10S17 Electric Wrist Rotator.5 different programs can be selected using the 757T13 Myo Select and allow individual adaptation to the respective patient. One or two 13E200 Electrodes or 13E202 Suction Socket Electrodes or a combination of one electrode and a 9X50/9X52 Linear Control Element are used to control the 13E205 MyoRotronic.Includes:MyoRotronic13E183 Buzzer for acoustic feedback on the switchoverThe 757T13 MyoSelect is required to select programs and adjust the 13E205 MyoRotronic. When using the 10S17 Electric Wrist Rotator and the 13E205 MyoRotronic, the distance between the residual limb end and wrist must be at least 65 mm . The rotation can be switched off using the 9X24 Connection Cable.

757L35 MyoCharge Integral charger is designed to facilitate quick and easy charging of the embedded MyoEnergy Integral batteries (757B35=0, 757B35=1 or 757B35=3) while in the socket wall.Charging is done by connecting the charging plug to the charging receptacle on the outside of the socket. The integrated magnet allows for the charging plug to be easily attached to the charging receptacle. The special contour of the charging receptacle and charging plug assures the quick, reliable positioning of the two components to each other.LEDs indicate the readiness of the charger and the current battery capacityIncludes:757L35 MyoCharge Integral battery charger757L16 power supply

The System Electric Hand Digital Twin with Quick Disconnect Wrist is suitable for all amputation levels, except wrist disarticulation. The Digital Twin control features a digital and dual channel control mode. The desired control mode is selected with the integrated 13E185 function plug. The hand features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. With potentiometer for adjusting the switching threshold (double-channel control). An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackProvides passive wrist rotation with ratchet lock (can be replaced by the 11S30 Friction Ring)

The SensorHand Speed with quick-disconnect wrist is suitable for all amputation levels, except wrist disarticulation. This hand features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function, as well as different control modes for the fitting with one or two electrodes. It features a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Gives passive wrist rotation with ratchet lock (can be replaced with the 11S30 Friction Ring)Electrode(s) must be adjusted with the 757M11 MyoBoy13E184=* Coding Plugs of various colours or the 757T13 MyoSelect are used to select the desired control mode. Please also note the table in the user manual for this13E184=1 (White: DMC plus® control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus® Control SUVA sensors and FlexiGrip can be switched off)Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack

The MyoHand VariPlus Speed with quick disconnect wrist is suitable for all amputation levels except wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. The high gripping strength (approx. 100 N) and speed (up to 300 mm/s), allow objects can be gripped quickly and precisely. The hand comes with a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackWith the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications, for optimum adaptationThe following control modes can be selected with the 757T13 MyoSelect:DMC plusAutoControl LowInputVarioControlVarioDualDigitalControlDoubleChannel Control

The System Electric Hand Digital Twin has a lamination ring suitable for wrist disarticulation. It features a centrally guided flat cable with automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. This hand has a potentiometer for adjusting the switching threshold (double-channel control), and an integrated slip clutch that allows the hand to be opened in case of power supply or myoelectric control failure.Gives passive wrist rotation with frictionFeatures a digital and dual channel control mode (desired control selected with integrated 13E185 function plug)Can be operated with the 757B35=* MyoEnergy Integral, 757B20/757B21 EnergyPack or the 757B15 X-ChangePack

SensorHand Speed with lamination ring wrist connection suitable for wrist disarticulation. Passive wrist rotation with friction. The SensorHand Speed features the automatic Auto-Grasp SUVA sensor technology, the FlexiGrip function as well as different control modes for the fitting with one or two electrodes. 13E184=* Coding Plugs of various colors or the 757T13 MyoSelect are used to select the desired control mode.13E184=1 (White: DMC plus control)13E184=2 (Red: AutoControl LowInput control)13E184=3 (Green: AutoControl)13E184=4 (Blue: VarioControl)13E184=5 (Yellow: VarioDual Control)13E184=6 (Violet: DMC plus Control SUVA sensors and FlexiGrip can be switched off)The SensorHand Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. It features a central flat cable, automatic shut-off electronics and integrated on-off switch, low friction bevel gear, positive back lock, and System Inner Hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

MyoHand VariPlus Speed with lamination ring wrist connection is suitable for wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer. The following control modes can be selected with the 757T13 MyoSelect: DMC plus AutoControl LowInput VarioControl VarioDual DigitalControl DoubleChannel Control The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePack. With central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.

The MyoHand VariPlus Speed with threaded stud wrist connection is suitable for all amputation levels except wrist disarticulation. It combines the mechanical characteristics of the SensorHand Speed and the control options of the DMC VariPlus System Electric Greifer. Thanks to the high gripping strength (approx. 100 N) and speed (up to 300 mm/s), objects can be gripped quickly and precisely. This hand has a central coaxial plug connection, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure. With the 757T13 MyoSelect, a total of 6 different programs can be selected and adapted according to patient indications. This permits optimum adaptation to the needs and abilities of the prosthesis wearer.The MyoHand VariPlus Speed can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackThe following control modes can be selected with the 757T13 MyoSelect:DMC plusAutoControl LowInputVarioControlVarioDualDigitalControlDoubleChannel Control

bebionic Hand with Flexion Wrist

By ottobock

This page is for the bebionic hand with flexion wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) PDAC Approved The flexion wrist allows the patient to position the hand in five locking levels of flexion and extension from -40° to +40° in 20° increments. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

The Transcarpal Hand DMC (Dynamic Mode Control) Plus utilizes cable lamination anchors to maintain a minimum build height, the Transcarpal Hand DMC plus provides a compact myoelectric option for fitting residual limb lengths from wrist disarticulation to transcarpal levels. This hand provides proportional control of grip speed and grip force in relation to the strength of the muscle signal. It features a centrally guided flat cable, automatic shut-off electronics and integrated on-off switch, low-friction bevel gear, positive back lock and system inner hand. An integrated slip clutch allows the hand to be opened in case of power supply or myoelectric control failure.Can be operated with the 757B35=* MyoEnergy Integral, the 757B20/757B21 EnergyPack or the 757B15 X-ChangePackMinimal clearance requiredVariable grip speed ranges from 15-130 mm/secCable Loops in lieu of lamination ring provide flexibility in fabrication30% lighter and 30% shorter than a standard 8E38 hand for longer amputationsNo wrist rotation: patient must be able to actively pronate and supinate the hand

The Myo Plus TR pattern recognition system by Ottobock received FDA clearance in September 2019. It is a control device for trans-radial myo-electric users, and its pattern recognition provides intuitive and individualized control by mapping a user’s unique muscle patterns and translating them directly into various movements of the prosthesis. For example, if the user thinks of opening his/her hand and activates the physiologic muscles used for that task, the system translates these signals to open the prosthetic hand or terminal device. It is designed to eliminate the need for switching events while improving speed and proportional control. The following is included:13E520 Myo Plus TR646C107 Bluetooth PIN cardLug wrenchLamination dummy for Myo Plus TRPositioning gauge for O&P professional 623F5013Z164 cable marking (three)Cable pull-off protection capNo Carbon Zone sticker647G1381 instructions for use (qualified personnel)647G1382 instructions for use (user)

The 12K12 MovolinoArm Friction is available in one size. It is the perfect complement to the current Ottobock product portfolio, since it allows fittings on the right and left side for children 3 to 5 years old. It is compatible with passive, cable-controlled and myoelectric arm prosthesis systems. It weighs only 182g. The elbow has one friction setting for humeral rotation and one for flexion or extension of the forearm. Parents can easily set this friction setting.Yet another advantage is that the elbow is compatible with the components of the 7.4 Volt Children System. The MovolinoArm Friction features an impressive design that has a very realistic natural appearance. The hand adapter of the 12K12 MovolinoArm Friction is naturally compatible with the Electric Hand 2000.The 10A40 Wood Adapter is available for passive prosthetic fittings. The 10V18=34 or 10V36=34 Wrist Unit is compatible with body-powered fittings. This joint can also be fitted in conjunction with the 2000 8E51=* Childrens Hand.

bebionic Hand with Short Wrist

By ottobock

This page is for the bebionic hand with short wrist ONLY. In order to fully fabricate, practitioners will need to also purchase the following options: Wrist rotation option: Active (1E205, 10S17); Passive (9E169, 10S4) Myo electrodes option: Suction (13E202=60) or Standard (13E200=60) Myo cables: 600mm (13E129=600) or 300mm (13E129=300) MyoEnergy Integral battery: Small hands with passive rotation (757B35=3), Any size with active rotation (757B35=5) MyoCharge Integral charger: (757L35) Optional extended warranty: 3yr (SP-8E7=3) or 5yr (SP-8E7=5) Bluetooth Long Range Dongle: B33061 (Optional) The bebionic Short Wrist consists of a low-profile connector for patients with a long residual limb. A short wrist lamination ring is also supplied with these hands. With this wrist option, the patient still maintains a high degree of freedom since the hand rotates against constant yet adjustable friction. The bebionic hand comes with a 24-month warranty at no additional cost, options to extend the warranty up to 5 years, and clinical and reimbursement support. Small hand is available in black or white finish Medium hand is available in black finish Bluetooth module now in both small and medium hands. You now only need one Bluetooth adapter (dongle) to easily connect to bebalance+ New bebalance+ V1.4 software with improved usability Improved cable guidance to secure thumb in opposition or lateral position PDAC Approved